fusion-io安装测试步骤 详解fusion-io安装测试步骤

今天测试了安装fusion-io， 160GB，

1、将fusion-io卡接到DELL R710服务器上。

2、下载驱动

站点上的iomemory-vsl-2.6.18-238.9.1.el5-2.3.1.123-1.0.x86_64.rpm有问题， 安装后不能生成iomemory-vsl模块

下载iomemory-vsl-2.3.1.123-1.0.src.rpm， 重新生成rpm包。

3、安装驱动

[root@sxs fusion-io]# ll

? 177064

-rw-r--r-- 1 root root 10319 02-23 15:10 fio-common-2.3.1.123-1.0.x86_64.rpm

-rw-r--r-- 1 root root 129421011 02-23 17:18 fio-firmware-101971.4-1.0.noarch.rpm

-rw-r--r-- 1 root root 12584 02-24 08:22 fio-remote-util-1.1.2.22-1.0.x86_64.rpm

-rw-r--r-- 1 root root 13442645 02-23 17:50 fio-smis-1.1.2.22-1.0.x86_64.rpm

-rw-r--r-- 1 root root 9692 02-23 16:32 fio-snmp-mib-1.1.2.22-1.0.x86_64.rpm

-rw-r--r-- 1 root root 7529 02-23 17:49 fio-sysvinit-2.3.1.123-1.0.x86_64.rpm

-rw-r--r-- 1 root root 641508 02-23 16:31 fio-util-2.3.1.123-1.0.x86_64.rpm

-rw-r--r-- 1 root root 5290921 02-23 16:19 iomanager-gui-2.3.2.1886-1.1.noarch.rpm

-rw-r--r-- 1 root root 30601963 02-23 16:19 iomanager-jre-2.3.2.1886-1.1.x86_64.rpm

-rw-r--r-- 1 root root 145868 02-23 15:11 libfio-2.3.1.123-1.0.x86_64.rpm

-rw-r--r-- 1 root root 471138 02-23 15:10 libfusionjni-1.1.2.22-1.0.x86_64.rpm

-rw-r--r-- 1 root root 08:54 iomemory-vsl-2.3.1.123-1.0.src.rpm

[root@sxs fusion-io]# rpmbuild --rebuild iomemory-vsl*.src.rpm

[root@sxs fusion-io]# cd /usr/src/redhat/RPMS/x86_64

[root@sxs fusion-io]# rpm -ivh iomemory-vsl-2.6.18-238.9.1.el5-2.3.1.123-1.0.x86_64.rpm

Preparing... ########################################### [100%]

1:iomemory-vsl-2.6.18-238########################################### [100%]

[root@sxs fusion-io]# rpm -Uvh lib*.rpm

[root@sxs fusion-io]# rpm -Uvh fio*.rpm

[root@sxs fusion-io]# rpm -ivh iomanager-*

Preparing... ########################################### [100%]

1:iomanager-jre ########################################### [ 50%]

2:iomanager-gui ########################################### [100%]

4、安装完的看fusion-io状态，由于没有加载模块不能显示设备

[root@sxs /]# fio-status

Retrieving Fusion-io product information...

Found 1 ioDrive in this system

Fusion-io driver version: Driver not loaded

Adapter: ioDrive

Fusion-io ioDrive 160GB, Product Number:FS1-002-161-ES SN:50137

Connected ioDimm module:

1: Fusion-io ioDrive 160GB, Product Number:FS1-002-161-ES SN:25018

1: Fusion-io ioDrive 160GB, Product Number:FS1-002-161-ES SN:25018

PCI:04:00.0

Firmware v5.0.7, rev 101971

Internal temperature: avg 47.7 degC, max 47.7 degC

5、加载模块

[root@sxs fusion-io]# modprobe iomemory-vsl

再次查看状态，显示设备为 fioa，

[root@sxs x86_64]# fio-status

Found 1 ioDrive in this system

Fusion-io driver version: 2.3.1 build 123

Adapter: ioDrive

Fusion-io ioDrive 160GB, Product Number:FS1-002-161-ES SN:50137

External Power: NOT connected

PCIE Power limit threshold: 24.75W

Sufficient power available: Unknown

Connected ioDimm module:

fct0: Fusion-io ioDrive 160GB, Product Number:FS1-002-161-ES SN:25018

fct0 Attached as 'fioa' (block device)

Fusion-io ioDrive 160GB, Product Number:FS1-002-161-ES SN:25018

Alt PN:FS1-SS2-161-ES

PCI:04:00.0, Slot Number:2

Firmware v5.0.7, rev 101971

160.94 GBytes block device size, 198 GBytes physical device size

Sufficient power available: Unknown

Internal temperature: 48.7 degC, max 48.7 degC

Media status: Healthy; Reserves: 100.00%, warn at 10.00%

root@sxs x86_64]# fdisk -l

Disk /dev/sda: 107.3 GB, 107374182400 bytes

255 heads, 63 sectors/track, 13054 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sda1 * 1 13 104391 83 Linux

/dev/sda2 14 5235 41945715 8e Linux LVM

/dev/sda3 5236 7846 20972857+ 82 Linux swap / Solaris

/dev/sda4 7847 13054 41833260 5 Extended

/dev/sda5 7847 7910 514048+ 83 Linux

/dev/sda6 7911 8166 2056288+ 83 Linux

/dev/sda7 8167 8422 2056288+ 83 Linux

/dev/sda8 8423 8934 4112608+ 83 Linux

/dev/sda9 8935 11494 20563168+ 83 Linux

Note: sector size is 4096 (not 512)

Disk /dev/fioa: 160.9 GB, 160937803776 bytes

255 heads, 63 sectors/track, 2445 cylinders

Units = cylinders of 16065 * 4096 = 65802240 bytes

Device Boot Start End Blocks Id System

/dev/fioa1 1 2445 157115448 83 Linux

[root@sxs x86_64]#

6、fdisk -l 显示/dev/fioa有个提示sector size is 4096 (not 512)， 初始化informix使用裸分区时，总部提示rootdbs空间不够。

需要将/dev/fioa的sector重新格式化为512K

可以使用fio-format 命令， 我使用fusion-io的gui管理工具，如下：

[root@sxs /]# iomanager

点击Format，按提示next 就可以了。

关键词： fusion-io安装测试步骤 详解fusion-io安装测试步骤 安装驱动的各种形态 安装驱动的各种形态详解